Flasher blocked drivers fix

Download this: Removal Script 

  1. Open Settings → System → Recovery.
  2. Under Advanced startup, click Restart now.
  3. Choose Troubleshoot → Advanced options → UEFI Firmware Settings → Restart.
  4. In the BIOS/UEFI screen, look for Secure Boot (usually under the Security, Boot, or Authentication tab).
  5. Set Secure Boot to Disabled. (On some computers you may need to change OS Type to “Other OS” or clear keys first if the option is greyed out.)
  6. Save and exit (usually press F10, then confirm)

Your computer will restart into Windows with Secure Boot turned off.

Step 2: Remove the blocking policy

Open the file "run me as admin" in the zip folder Downloaded above.  Make sure to "Run the file as Administrator". Reboot when it finishes.

Step 3: Install the Flasher drivers

  1. Make sure the OpenPort 2.0 is unplugged from USB.
  2. Run the flasher drivers download
  3. Right-click the installer and choose Run as administrator.
  4. Follow the on-screen prompts and complete the installation.
  5. Plug the OpenPort 2.0 back in (preferably directly into a USB port, not a hub).
  6. Open Device Manager and confirm the device appears without a yellow warning triangle.

Step 4: Turn Secure Boot back on

Once the driver is working, you can re-enable Secure Boot in the BIOS if you want the extra protection. Resume BitLocker if you suspended it earlier.